Important Note: These downloads will require
PRE-Flight RC Simulator to be
installed. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest
version 6.15.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Note: Subscription is required for access and is free of charge.
New Model for free download - Avatar Scorpion Gunship.
This is a super scale PRE-Flight model of the AT-99 Scorpion Tiltrotor Gunship from James Cameron's blockbuster
"Avatar". The Scorpion has fully functioning dual rotors which tilt and change speed in response to
control inputs and is armed with missiles powerful enough to bring down even a Great Leonopteryx.
The Scorpion features a realistic turbine whine and rotor blade sound. Small amounts of pure Unobtanium
is also used in the high-performance, zero-friction bearings of this agile aircraft and also for a
levitating effect which increases its load-carrying capacity and range.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the scorp.3dm file from the new folder.
The McDonnell Douglas Harrier is the most successful VTOL jet in history - finding service in many
countries - even finding its way into movies like "True Lies". Its unique rotating jet nozzles enabled
Vertical Take-Off and Landing on any small field or carrier, allowing amazing versatility and scope of operations.
This PRE-Flight premium model of the Harrier has very high detail, fully working landing gear, rotating jet nozzles,
VTOL capability, spinning turbine, and operational Maverick missiles (fire and reload using the action channel). It is also
equipped with a special stabilizing feature which allows easier flying at hover.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the harrier2.3dm file from the new folder.
The Fairchild Republic A-10 Thunderbolt is commonly known as the "Warthog" or simply "Hog" due to its
not-very-pretty looks and the sound of its heavy gun. The Warthog is almost exclusively used
for close ground support and is designed for high survivabily even in the face of heavy ground fire.
The Warthog's main armament is the GAU-9 Avenger cannon plus ground attack weapons like the Maverick
air-to-surface missile. With triple-redundant systems, "bathtub" titanium pilot armor, foam-protected fuel
tanks, and specially designed landing gear, the Warthog has proven itself as the most durable aircraft
in the US arsenal.
This PRE-Flight model of the Warthog has very high detail, fully working landing gear, camouflage "Hog"
paint scheme, and operational Maverick missiles (fire and reload using the action channel).
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the a101.3dm file from the new folder.
New Model for free download - SpaceShipTwo by Scaled Composites.
SpaceShipTwo, christened by Governor Schwarzenegger as the VSS Enterprise, was designed by Burt Rutan's Scaled Composites to carry
commercial passengers on sub-orbital flights. It recently completed a milestone glide test and after completing a
powered test, will soon be flying $200,000-per-seat flights into space.
This PRE-Flight model of the VSS Enterprise (named after the fictional starship in TV's StarTrek) rides under WhiteKnightTwo to the proper altitude,
then separates from the mothership to glide to a safe landing, or optionally, unleashes its rocket engine, boosting to high altitude before landing.
To operate in PRE-Flight, use the Plane controls, then aux1 to release from mothership, and retract landing gear to fire rocket
engine. When using the keyboard, hold down 'X' to release, then 'B' to fire.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the ss23.3dm file from the new folder.
New Model for free download - Kyushu J7W1 Shinden.
The Kyushu J7W1 Shinden (or "Magnificent Lightning") was a fighter concieved by Captain Masaoki Tsuruno with the idea that the
plane can be retro-fitted with a turbojet engine. Even with the original 2100hp, 18-cylinder radial engine, the Shinden had very impressive
performance, with the swept-back wings and canard design.
This PRE-Flight model of the Shinden includes moving control surfaces, super-detail, operating landing gear, and new animated
model views (press F11).
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the shinden1.3dm file from the new folder.
New Model for free download - B-25 Mitchell Bomber.
The B-25 Mitchell by North American Aviation is most famous for the Doolittle Raid which was the first US attack on the Japanese
mainland in WWII. It was also the plane that hit the Empire State building in New York resulting in 14 deaths. It was because of this
that the Twin Towers of the World Trade Center were designed to withstand the impact of large aircraft.
This PRE-Flight model of the B-25 includes moving control surfaces, super-detail, operating landing gear, and paintball bombs.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the b252.3dm file from the new folder.
New Model for free download - Messerschmitt Bf 109.
The Me 109 was a German WWII fighter - designed by Willy Messerschmitt and formed the backbone of the Luftwaffe fighter
force. The 109 was extremely well designed as evidenced by the fact that it was the most produced airplane of
the war and the most manufactured fighter in history with over 33,000 produced.
This PRE-Flight model of the Me 109 includes moving control surfaces, super-detail, operating landing gear, and aerobatic capabilities.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the bf1092.3dm file from the new folder.
New Model for free download - Fieseler Fi 156 Storch.
The Fieseler Fi 156 Storch (stork) is a German liason plane that was used before and throughout WWII. The
Storch STOL (Short Takeoff and Landing) design was so successful, it was adopted by many countries and still flies
today. It was able to take off vertically in a 16mph head wind and was able to land almost anywhere due to its
unique landing gear. In addition, the wings can be folded and the aicraft stored or towed.
This PRE-Flight model of the Storch includes moving control surfaces, super-detail, STOL capabilities and animated model views.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the storch.3dm file from the new folder.
The Supermarine Spitfire is a plane that needs no introduction. Credited with winning the Battle of Britain
and changing the course of history, the legendary Spitfire was truly one of the most famous icons of WWII.
This PRE-Flight model of the Spitfire includes moving control surfaces, super-detail, and operating landing gear.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the spitf1.3dm file from the new folder.
New Model for free download - Lockheed P-38 Lightning.
The Lockheed P-38 Lightning was unique among the fighters of World War II. It had twin engines arranged
in a twin-boom configuration giving it high speed, with the central cockpit and weapon nacelle giving it
concentrated and accurate gunfire. It was for this reason that the Lightning proved effective against
enemy fighters making it the longest serving American fighter of the War.
This PRE-Flight model of the Lightning includes moving control surfaces, super-detail, and operating landing gear.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the P382.3dm file from the new folder.
New Model for free download - Mitsubishi G4M Betty.
The Mitsubishi G4M "Betty" was Japan's best bomber in WWII. It enjoyed enormous success in the
start of the war - playing a key role in the capture of the Philippines and the historic sinking of
Britain's HMS Prince of Wales and HMS Repulse. Towards the end of the war, it was obsolete and was
relegated to carrying the infamous Ohka Kamikaze rocket plane.
This PRE-Flight model of the Betty includes moving control surfaces, super-detail, operating landing gear,
and paintball bombs.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the g4mbetty1.3dm file from the new folder.
The Firefly is a demonstrator based on the old Hughes S-300 and fitted with a 190hp electric
motor and powered by lithium-ion batteries. The expected endurance is only 15 minutes but will improve
exponentially as new batteries (possibly lithium-air anodeless) push the flying time to over 3 hours and
beyond. It is claimed that the Firefly as it stands already represents a huge 300% improvement in
propulsion efficiency. RC Helicopter flyers will note that the 15 minutes flight duration is about the
same as the average electric RC helicopter - also running on lithium (polymer) batteries.
This PRE-Flight model of this soon-to-make-history aircraft is full of accurate detail - even to the sound of the
almost whisper-quiet electric motor.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the firefly2.3dm file from the new folder.
The "Ship of Dreams", the RMS Titanic, is the most famous ship in history. The largest passenger ship of the time,
she departed England on her maiden voyage on the 10th April 1912, and sank after hitting an iceberg resulting
in the loss of 1,517 people.
The PRE-Flight Titanic model is full-scale (269 meters long), high-quality (345874 polygons) and accurately depicts the
Titanic on her fateful voyage - from her bronze propellers, thru the 9 highly-detailed decks (some decks
with realistic wooden plank texture), and to the pennants that she was flying on the day she sank. It contains
hundreds of tiny details like the brass bell that the lookout used to signal the approach of the fatal
iceberg, the radio transmitter wiring, even a genuine Titanic-style lounge chair.
The PRE-Flight Titanic Scenery is actually 3 scenries in 1. The first where the Titanic model is stationary
for detailed exploring. The second scenery has the Titanic running at cruising speed and grazing an iceberg.
And lastly, the 3rd scenery has the Titanic sinking.
This release also makes available an updated version of PRE-Flight's UFO which makes an excellent
camera platform (press F11) to explore the Titanic. Any PRE-Flight aircraft can also be flown in the
scenery - make high-speed overhead passes with the Pitts Biplane, hover with the helicopters for a
close look, or even try your hand at bombing a 269-meter moving target with the B2 or B-29.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "scenes" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the files titanic.sce,
titberg.sce, and titsink.sce in the new folder.
This is an update to the PRE-Flight UFO. The Model views (F11) have been enhanced.
Install Notes: Unzip the file into the "UFO" folder under "models" folder in the PRE-Flight
install folder. Make sure you overwrite the old ufo1.3dm file.
New Model for free download - Gee Bee Super Sportster.
The Gee Bee Model R Super Sportster "Flying Silo" was a racing airplane built by the Granville
Brothers Aircraft (hence Gee Bee) of Springfield Massachusetts in 1932 and was famous for a long string of
race wins and speed records. It represented the state of the art at the time - designed for maximum
performance and, consequently proved to be extremely dangerous to fly.
This PRE-Flight model is a gargantuan 1/3 scale (2.54m wingspan) and features movable controls
and the same agility as the real Model R-2. Includes cockpit and wingcam views as well as chase
plane view.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the gb2.3dm file from the new folder.
The Solar Impulse by the École Polytechnique Fédérale de Lausanne made the first overnight flight
by a manned solar-powered plane on July 8 2010. The plane designated the HB-SIA was piloted by
André Borschberg - Swiss businessman, pilot, and co-founder of the Solar Impulse project.
This PRE-Flight model is actually 2 models in one - a humongous 1/4 scale model (15.85m wingspan)
and a smaller 1/16th scale model of the historical aircraft. It features movable controls, realistic solar cell arrays
on its wings and "toothpick" outriggers and main landing gear which operate faithfully.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the solari01.3dm and
solari01s.3dm files from the new folder.
The Lockheed F-117 Nighthawk was the first operational aicraft designed with stealth technology. A
brainchild of the Skunk Works, its operation was shrouded in complete secrecy for 7 years before its
existence was finally acknowledged in 1988.
This PRE-Flight model of the Nighthawk features fully-functioning control surfaces and operating
landing gear. It also has a special "Farewell" paint scheme with Stars and Stripes painted on the
flat underbelly which was used on one of the last flights of this remarkable plane before its
retirement in 2008.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the f117.3dm file from the
new folder.
New Sceneries for free download - Indoor Basketball Court
New Sceneries for free download - Europa Ice Scenery
The PRE-Flight Europa Ice Scenery simulate a distant frigid moon of Jupiter.
Take off and land in an icy, highly-reflective pool between Europa's mountains while enjoying
the awesome view of the nearby parent planet, Jupiter.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
If you are new to PRE-Flight or have an older demo, download the latest
free demo (version 6.15) here.
Install Notes: Unzip the file into a new, empty folder under "scenes" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Scenes, Load and select the file europa.sce in the new folder.
New Model for free download - Avatar Samson Helicopter.
This is a super scale PRE-Flight model of the Samson Helicopter from James Cameron's blockbuster
"Avatar". The Samson has fully functioning dual rotors which tilt and change speed in response to
control inputs - perfect for pursuing those wily Navi.
The Samson features a realistic turbine whine and rotor blade sound. Small amounts of pure Unobtanium
is also used in the high-performance, zero-friction bearings of this agile aircraft and also for a
levitating effect which increases its load-carrying capacity and range.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the scorp1.3dm file from the
new folder.
The PBY Catalina by Consolidated Aircraft found wide use in World War II as bomber, escort, cargo, and rescue plane.
Over 4000 Catalina's were produced - making it the most successful flying boat in history.
This super scale PRE-Flight model of the Catalina is also amphibious. Wheels are automatically lowered
and wing-tip floats rotated on land operation and is steerable in both land and water. For water operation,
please see link below to download water sceneries.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the catalina1.3dm file from the
new folder.
New Model for free download - B-2 Spirit Stealth Bomber..
This awesome plane has all control surfaces accurately working - elevons and split-rudders (which replace a conventional rudder and tail). It also has retractable gear and highly-detailed paint scheme.
This super scale PRE-Flight model of the B-2 can drop paintballs which splatter with hightly-visible
yellow paint when they hit the ground. The bomb can be dropped using the action channel.
A special "bombadiers's view" is selectable using F11 when flown in 3D scenery.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the b2.3dm file from the
new folder.
New Model for free download - Boeing B-29 Superfortress.
This super scale PRE-Flight model of the B-29 can drop paintballs which splatter with hightly-visible
yellow paint when they hit the ground. The bomb can be dropped using the action channel.
A special "bombadiers's view" is selectable using F11 when flown in 3D scenery.
In addition, the B-29 is composed of over 107,000 polygons, and has full moveable control
surfaces, retractable landing gear, revolving gun turrets (controlled by the rudder channel),
detailed interior visible in the aircraft views, and special reflective paint and markings of "Enola Gay".
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the b291.3dm file from the
new folder.
New Sceneries for free download - Indoor Basketball Court
The PRE-Flight Indoor Basketball Court Scenery simulate an indoor scene featuring a partially reflective
floor.
Also featured in these sceneries is PRE-Flight's new Advanced Animated scenery elements in the
form of an autonomous, collision-enabled RC Goodyear Blimp which makes flying around the confined
space a bit more interesting.
Pylons may also be positioned anywhere in the scene using the built-in Scenery Editor.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "scenes" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Scenes, Load and select the file indoorref.sce in the new folder.
New Model for free download - Sukhoi Su-26 Aerobatic Plane
The PRE-Flight Sukhoi Su-26 is an aerobatics-capable plane from the former Soviet Union,
powered by a Vedeneyev M-14P radial engine boasting 270 kW (362 hp).
The Sukhoi, since its inception in 1984, has been the plane of choice in many aerobatic
competitions - earning its pilots the highest praise in the world.
The PRE-Flight model Sukhoi is highly aerobatic. Like its full-sized counterpart, it features
large, high deflection control surfaces. It is capable of hovering and actually has a special
gyro-stabilized feature which makes hovering easy for novices. This feature is activated by the
action channel.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the sukhoi1.3dm file from the
new folder.
New Sceneries for free download - Drive-In Theater
The PRE-Flight Drive-In Theater Sceneries simulate a drive-in - complete with a big movie screen and cars.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "scenes" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Scenes, Load and select these files one-by-one: drivein.sce, drivein2.sce
New Model for free download - Bell H-13 Sioux Amphibious Helicopter
The PRE-Flight H-13 Sioux Helicopter was made famous by the TV series "MASH" (or Mobile Army Surgical Hospital).
The H-13 Amphibious Helicopter is a variant of the original 260 hp, piston-engined heli and is equipped with floats for
water operation.
The PRE-Flight Bell H-13 features water and land take-offs and landings. For water operation, please see link
below to download water sceneries.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the bellh13amp.3dm file from the
new folder.
New Model for free download - DHC-3 Otter Amphibious Plane
The PRE-Flight de Havilland Canada DHC-3 Otter is the "Big Brother" of the DHC-2 Beaver - made famous by
Harrison Ford (who owns one in real life) in the movie "Six Days Seven Nights".
The PRE-Flight Otter features water and land take-offs and landings. Wheels are automatically lowered
on land operation. It retains the original plane's STOL capabilities and is steerable in both land and
water. For water operation, please see link below to download water sceneries.
Please note that this requires PRE-Flight Version 6 or higher. Owners of full versions of PRE-Flight ver 2.70
or higher, click here for your free update to the latest version 6.15.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load then locate and select the otter1.3dm file from the
new folder.
The PRE-Flight Ruffey Lake Sceneries re-create the real location in Melbourne, Australia.
It is a collection of 4 scenes which allow the user a choice of take-off points, depending on the model the user
wishes to fly and also how "busy" the Lake will be.
The scenes feature PRE-Flight's version 6 level of advanced graphics.
Install Notes: Unzip the file into a new, empty folder under "scenes" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Scenes, Load and select these files one-by-one: RuffeyLake.sce, RuffeyLake2.sce,
RuffeyLakeNT.sce, RuffeyLakeNT2.sce
New Model for free download - Apollo 11 Eagle Moon Lander
The Eagle Moon Lander was designed and built by Grumman Aircraft Engineering at a cost of around $350
million. Ungainly as it looked, the LEM (Lunar Excursion Module - its official title) was the most reliable
component of the Apollo system, the only one never to have suffered a major failure.
If you have the "right stuff", fly this super scale model of the Eagle which features gold foil coverings,
rocket sound, full 6-degrees of freedom controls, 1/6th moon gravity physics, and more.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the eagle1.3dm file.
New Model for free download - Hitler's Stealth Fighter (Horten Ho 229)
The Horten Ho 229 was the favorite of Hitler's Luftwaffe chief, Hermann Goering, calling it the only aircraft
to come close to his "1000,1000,1000" requirements - meaning an aircraft that could carry 1000kg of bombs a
distance of 1000km at a speed of 1000km/hr.
The plane that "might have changed the war" is presented by PRE-Flight as a super scale model with
highly detailed weapons and moveable controls. An unusual sister model (included) is a variant with
stealthy transparent skin which makes internal details (like landing gear and cannons) visible.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the horten1.3dm file for the
regular model and the horten1ts.3dm file for the transparent-skinned model.
New Model for free download - Republic P-47 Thunderbolt
The Republic P-47 Thunderbolt (the "Jug" - short for Juggernaut, according to the British) was superlative
in many ways. It was the largest, heaviest, and most expensive piston-powered fighter fighter in history.
Its 8 50-caliber machine guns made it especially adept against light ground targets, and its 2,500-pound
bomb load was effective against heavy tanks.
This super scale PRE-Flight model of the "Jug" has highly detailed weapons and moveable controls. As usual with PRE-Flight models, the Thunderbolt
can be "painted" to reproduce many different paint jobs.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the tbolt1.3dm file.
New Model for free download - Messerschmitt Me 262
The Messerschmitt Me 262 Schwalbe ("Swallow") was the world's first operational jet fighter. Its maximum
speed of over 900kph and tremendous rate of climb of 1200 m/min made it a deadly opponent for even the fastest
Allied aircraft. Fortunately, it was available only in small numbers - not enough to change the outcome
of World War II.
This super scale PRE-Flight model of the Me 262 has highly detailed weapons and moveable controls. As usual with PRE-Flight models, the Me 262
can be "painted" to reproduce many different paint jobs.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the me262.3dm file.
New Model for free download - Gotha G.V
As WWI unfolded, the concept of the "battle plane" - a heavily-armed fighter - materialized in the
German Gotha series. This proved no match to the nimble and more lightly-armed fighters and the Gotha
was quickly and successfully converted to bomber duty. This was a very timely move, as the lumbering Zeppellins were
proving vulnerable to Allied defences.
This super scale PRE-Flight model of the Gotha has highly detailed weapons and moveable controls as well
as a very-detailed cockpit and wooden propellers. The control linkages are external to the fuselage, in line
with the design conventions of the day. As usual with PRE-Flight models, the Gotha can be "painted"
to reproduce many different paint jobs.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the gotha1.3dm file.
New Model for free download - Ju 87 Stuka.
The Junkers Ju 87 Stuka (from German Sturzkampfflugzeug, "dive bomber") was designed from the beginning,
as a dive bomber and this role it performed brilliantly. It was capable of very precise bombing - diving up to 90-degree
angles then automatically pulling out of the dive after bomb-release. This automatic feature was required as
pulling from the 600kph-plus dive usually blacked-out the pilot.
This super scale PRE-Flight model of the Stuka has highly detailed weapons and moveable controls. As usual with PRE-Flight models, the Stuka
can be "painted" to reproduce many different paint jobs as the Stuka found service in almost all fronts.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the stuka.3dm file.
New Model for free download - MQ-9 Reaper.
The General Atomics MQ-9 Reaper is truly the deadliest Radio-Control (RC) aircraft ever made.
This Unmanned Aerial Vehicle (UAV) can carry a payload of 1,700kg and has a maximum endurance
of 42 hrs (with external tanks) making it a truly effective attack and surveilance craft. RC'ers will recognize
the single-piece, flexible main landing gear which is so common in smaller, less lethal RC airplanes because of its simplicity.
This download is actually 2 models in one: a 1/4th scale model and the full-sized Reaper with 20-meter
wing span. The super scale PRE-Flight models of the Reaper features super-high detail, Paveway laser-guided bombs,
accurate operating landing gear, moveable control surfaces, and even a rotating "eyeball" camera.
These models can be "painted" to reproduce the ever-growing number of Reaper variants in several countries.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the reaper.3dm and reaperf.3dm files.
New Model for free download - F4U Corsair.
The Chance Vought F4U Corsair is the longest production run of any piston-powered fighter
in US history. First flown in 1942, the Corsair was not initially popular due to its unsuitability
for carrier landings, earning it the name "bent wing widow-maker" due to numerous landing incidents.
However, its superior fighting performance earned it the Japanese nickname of
"Whistling Death", for the noise made by airflow through the wing root-mounted oil cooler air intakes.
This super scale PRE-Flight model of the Corsair is composed of almost 120,000 polygons - making
it one of the most realistic models available. Total model size is over 17MB (8.8MB zipped).
It has realistic operating landing gear and moveable controls.
This model can be "painted" to reproduce any of the Corsairs of the 7 countries and 2 major conflicts
where it found service.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the cors02.3dm file.
New Model for free download - F-4 Phantom.
The McDonnell Douglas F-4 Phantom II is the most numerous American supersonic military
aircraft ever. It also holds the record for the longest continuous production (24 years)
for a fighter. When first flown in 1960, it had advanced pulse-doppler radar and
made extensive use of titanium in its airframe - the first time in any jet fighter.
This super scale PRE-Flight model of the Phantom has operating landing gear,
afterburning jets, moveable controls (including stabilator), and operating landing hook.
This model is in standard US Navy livery but can be "painted" to reproduce any of the
Phantoms of the 11 countries where it found service.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the phantom1.3dm file.
New Model for free download - Mitsubishi Zero.
The Mitsubishi Zero was hugely feared in the beginning of World War II with its
appearance in the attack at Pearl Harbor. It appeared superior in every way to the
US warplanes - maneuverability, speed, endurance and firepower. It was only after
discovering its Achilles' heel - lack of armor - that the US forces were able
to keep Japan from total air superiority over the Pacific theater.
This detailed, super scale PRE-Flight model of the deadly Zero has operating
control surfaces and landing gear.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the zero1.3dm file.
New Model for free download - Ford Trimotor.
The design of the Ford Trimotor certainly proves that they didn't think much
of aerodynamics in 1925. Its all-metal corrugated skin was all about strength
and low weight, resulting in a rugged design able to carry up to nine passengers
plus pilot, co-pilot and stewardess.
This hugely detailed, super scale PRE-Flight model of the Trimotor has operating control surfaces,
period external control wires, and unique corrugated aluminum skin.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the forda51.3dm file.
New Model for free download - F-104 Starfighter.
Called the "missle with a man in it", the Lockheed F-104 Starfighter was one of
the more extreme jet fighter designs which adopted a minimalist architechture-
fitting the smallest possible airframe around one of the most powerful engines
available in the 1950's. The result was a plane that was more starship than
jet fighter.
This super scale PRE-Flight model of the Starfighter has operating landing gear
and afterburning jet.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the f1042.3dm file.
New Model for free download - Marine One Sea King.
Helicopter builder Sikorsky built the Sea King in 1957, beginning a long career
as a submarine hunter-killer, then diversifying into search and rescue, as well as
executive transport. Designated the SH-3, the Sea King was designed for shipboard
operation with folding rotor blades, as well as amphibious operation. Weapons capability
was equally diverse, from torpedoes and missiles, to sonobouys for sub hunting.
This super scale PRE-Flight model of the Sea King has a five-bladed rotor,
operating landing gear, and Presidential Marine One livery.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the seaking01.3dm file.
New Model for free download - General Dynamics F-111.
The F-111 was designed in an era where "cost was not an issue" - resulting in an
aircraft featuring pioneering and expensive technologies like variable-geometry wings,
afterburning turbofan engines and terrain-following radar. So advanced was the F-111
that it inspired the fictional aircraft in the "Thunderbirds" series as well as real
Soviet swing-wing designs.
This super scale PRE-Flight model of the F-111 has variable-geometry swing-wings,
operating landing gear, and twin afterburning jets.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the f111a.3dm file.
New Model for free download - Fokker Dr.1 Triplane.
Easily the most famous of all World War I planes, the Fokker Dreidecker (triplane), was
designed by Reinhold Platz and built by Fokker-Flugzeugwerke as a response to the
success of the British Sopwith Triplane. Used to deadly effect by Manfred von Richthofen
(aka "The Red Baron"), the plane gained notoriety beyond what was actually a very
frail and unstable aircraft.
This super scale PRE-Flight model of the Triplane has moveable control surfaces, a
realistic Oberursel rotary engine, and highly detailed weaponry.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the tripe02.3dm file.
New Model for free download - Fokker Eindecker.
Designed by Dutch engineer Anthony Fokker, the Eindecker or "monoplane" in English,
was the first plane to be fitted with a gun/propeller synchronizer gear which allowed
its machine gun to fire thru the propeller arc. So advanced was this feature that it
started the "Fokker Scourge" where the Allied planes became "Fokker Fodder" for the
early German Aces.
This super scale PRE-Flight model of the Eindecker has moveable control surfaces and
a realistic Oberursel rotary engine (in which the cylinders rotated with the prop - resulting
in a difficult airplane to master).
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the eind01.3dm file.
New Model for free download - Boeing B-17 Flying Fortress.
Although the Boeing B-17 was not the most capable bomber in terms of bomb load and
performance, it was the darling of the bomber air crews due to its legendary resistance
to battle damage. The B-17 bristled with defensive guns - much to the crews' delight -
earning it the title "Flying Fortress".
This super scale PRE-Flight model of the B-17G has moveable control surfaces and retractable
landing gear, as well as bomber and pilot views.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the b1701.3dm file.
New Model for free download - Boeing B-52 Stratofortress.
The "Stratofortress" or BUFF (Big Ugly Fat Fellow) as its called by the Air Force,
first entered operations in 1955 and is projected to become the longest operational
aircraft of all time due to the Air Force's intention to keep the B-52 in service until
2040.
This super scale PRE-Flight model of the B-52 has moveable control surfaces and unique
retractable landing gear, which, like the original's, can pivot 20 degrees outward.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the b5201.3dm file.
New Model for free download - Boeing B-29 Superfortress.
Called "The Plane that Won the War", the Boeing B-29 Superfortress was one of the most
advanced bombers of its time - featuring innovations like remote-controlled gun turrets
and a fully pressurized cabin. So advanced was its design that it was used long after
its first flight in 1942 - it was only retired from service in the 1960s. It was also
copied down to the rivets by the Soviet Union and called the Tupolev Tu-4.
This super scale PRE-Flight model of the B-29 is composed of over 107,000
polygons, and has full moveable control surfaces, retractable landing gear,
revolving gun turrets (controlled by the rudder channel), detailed interior visible in the
aircraft views, and special reflective paint and markings of "Enola Gay".
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the b291.3dm file.
Beechcraft Staggerwing.
Regarded by many as "The Most Beautiful Airplane" of all time - certainly the
most beautiful biplane, the Beechwood Staggerwing was designed as built from the
start in 1932 to be THE premium business executive airplane - much like the Gulfstream
executive jets of today.
This large scale PRE-Flight model of the Staggerwing is composed of over 130,000
polygons, and has full moveable control surfaces, retractable main and wheel landing gears,
finely detailed radial engine and even a detailed, cream leather interior. Performance
is as would be expected of a muscle biplane.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the beechc.3dm file.
Focke-Wulf Triebflugel.
The Focke-Wulf Triebflugel's tailsitter design coupled with the ramjet-powered
rotor made it one of the most unique aircraft ever concieved. It had only reached
wind-tunnel testing when the allied forces put an end to its development - no flying prototype was ever built.
This PRE-Flight model of the Triebflugel has an operating rotor, animated flame
at the ramjet exhausts and even "3D" sound coming from the rotating engines. Flying
the model is similar to flying a helicopter, up to the point where enough forward speed
enables the model to fly more like a conventional aircraft. As in the real thing,
landing is exceptionally challenging.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the trifl.3dm file.
This PRE-Flight model commemorates the launch of "Eve" -
the first of a fleet of carrier aircraft which will be used to launch the
SpaceShipTwo spacecraft.
Install Notes: Unzip the file into a new, empty folder under "models" folder in the PRE-Flight
install folder. Run PRE-Flight and go Menu Models, Load and select the wk2.3dm file.
This new type Panoramic Photoreal Scenery is composed of over 18 MB
(unzipped) of high resolution photographic images of the actual flying field.
Look straight up to view beautiful clouds and down to follow the shadow of your model
on the image of actual grass.
Install Notes: Unzip the file into a new folder under "scenes" folder in the PRE-Flight
install directory. Run PRE-Flight and go Menu Scene, Load and select the pano1.sce file.
To fully enjoy this Scenery, some PRE-Flight settings must be
adjusted. Make sure you read the readme.txt file for proper operation of the scenery.
This model of the military version of the DC-3 is programmed to disgorge an unlimited number of paratroopers on your flying field.
Program your Transmitter on channel _Aux3 or (using the keyboard controls) press the "T" key to start dropping, and "Y" to stop. The rate is entirely up to you.
You can Pull Down Menu Model, Quick Edit then click the Parachutes Tab and put in how many parachutes per second you want to drop.
From 1 (Paratroopers Picnic) to 3 (D-Day in Europe!) per second.
The plane has the usual moveable controls and working gear.
Includes intructions on how to do your own paint job.
Install Notes: Unzip the file into a new folder under "models" in the PRE-Flight install folder. Run PRE-Flight and go menu Model, Load and select the c471.3dm file.
Armed to the teeth with machine guns, grenade launchers and rockets, the Chinook helicopters were
always a welcome site to the US Armed Forces in Vietnam. The "Easy Money" was the only ACH-47A to survive
the Vietnam War. Includes intructions on how to do your own paint job.
Install Notes: Unzip the file into a new folder under "models" in the PRE-Flight install folder. Run PRE-Flight and go menu Model, Load and select the chi01.3dm file.
The Lancaster was the most successful bomber used by the Royal Air Force and the Royal Canadian Air Force in WWII.
Able to carry almost its own weight of fuel and bombs, it was the only bomber capable of carrying the "Grand Slam" - a 22,000 pound bomb, and the "Dam Buster" spinning bomb.
This model features very high detail: over 30 glass windows and canopies, retractable gear, moveable control surfaces, rotating turret (use rudder to operate),
detailed cockpit, showing seats, and more.
The Lancaster is also available in night-bomber paint scheme - see below.
Includes intructions on how to do your own paint job.
Install Notes: Unzip the file into a new folder under "models" in the PRE-Flight install folder. Run PRE-Flight and go menu Model, Load and select the lanc01.3dm file.
In 1917, the Royal Aircraft Factory produced the SE5 biplane - the first British fighter to be armed with 2 guns.
This model features very high detail: Vickers and Lewis machine guns, wing wires, wooden propeller, cockpit instruments, fully moveable control surfaces, Hispano-Suiza engine, and more.
Includes intructions on how to do your own paint job.
Click here for the zip file.
DC-3 Gooney Bird
The Douglas DC-3 is one of the most endearing and numerous airplanes ever built. Moveable control surfaces, retractable gear, and special
metal paint finish. Includes intructions on how to do your own paint job.
Click here for the zip file.
SpaceShipOne Model and Screensaver
On the 4th of October the year 2004, aviation and space history was made as Brian Binnie, a 51-year-old former navy pilot, piloted
Scaled Composite's SpaceShipOne - the first commercial spaceship. An hour after landing, Burt Rutan - owner of Scaled Composites claimed the
$10 million X Prize purse offered by Ansari.
The feat is likened to Lindbergh claiming the $25,000 Orteig Prize after making his solo transatlantic
flight in 1927.
Like the Spirit of St. Louis, SpaceShipOne will herald a new, golden age where space flights will become as routine as air travel
is today.
To commemorate this event, PRE-Flight is pleased to announce the SpaceShipOne Screen Saver and Flying Simulator.
Important Note: Please consult the readme.txt file on how to install and operate.
Bright yellow, small, cute, and christened "The City of Springfield", you'd half
expect Bart Simpson (from "The Simpsons" cartoon) as the pilot. The Gee Bee model Z
was in fact, a racing plane that won every race it ever entered until a fatal accident in
a speed record attempt ended its brilliant carreer. A mere 15 feet (4.57m) in wingspan but
powered by a 750hp Wasp Sr. R-1340 engine, the Model Z was the predecessor of the R-1 that
Jimmy Doolittle made famous. This model of the "Z" boasts over 25,000 polygons of detail: realistic Wasp engine,
cooling vents ,landing gear, wire bracing, and distinct yellow paint scheme. A smoke trail
generator allows you to do skywriting and stunt flying.
Fly with the included original paint job or do your own custom scheme with the included bitmap files and instructions.
Please consult the readme.txt file on how to operate.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the GB01.3dm file. Consult the readme.txt file for instructions on how to enable the advanced features.
This Lockheed F-16 has an incredible count of over 45,000 polygons making it one of the most detailed flying models available.
It features a smoke trail generator (for skywriting and aerobatics) and a vulcan cannon which fires visible tracer rounds and actually puffs smoke and makes that awesome sound.
The "tricycle" landing gear is fully operational, the afterburner exhaust flame is animated, and lights flash.
Fly with the included "Thunderbird" paint job or do your own custom scheme with the included bitmap files and instructions.
Please consult the readme.txt file on how to operate.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the f161.3dm file. Consult the readme.txt file for instructions on how to enable the advanced features.
The B-2 Spirit by Northrop Grumman is the worlds most advanced weapon. This awesome plane has all control surfaces accurately working - elevons and split-rudders (which replace a conventional rudder and tail). It also has retractable gear and highly-detailed paint scheme.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the b2.3dm file.
Ultra-detailed model of France's most popular helicopter in a monster-sized scale. Fully animated - missiles actually fire with a special firing sound (great for multiplayer sorties) and lights flash.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the alouette.3dm file.
Ultra-detailed model of the famous WWII Battle of Britain warplane in a two-in-one package: Small electric park flier and monster-sized 1/4 scale. Both fully animated - control surfaces move and retracts work. Nice camo paintwork - with instructions to do your own paint scheme using any paint program.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the spit01s.3dm file for the small scale electric or spit01l.3dm for the large 1/4 scale.
Albert Park in Melbourne, Australia is home to the Australian Grand Prix. The track winds around a lake and is situated just south of the city center. The field is adjacent to my favourite pub.
Install Notes: Unzip the file into a new directory under "scenes" folder in the PRE-Flight install directory. Run PRE-Flight and go menu Scene, Load and select the phapark.sce file.
Make sure you read the readme.txt file for proper operation of the scenery.
This photorealistic scenery of a small field in Melbourne is achieved by using actual photos, seamlessly stiched together into a full 360-degree view (up, down, left, and right). Includes photorealistic grass, houses, trees, mud, ducks, etc. The shadow of the model as it flies around you is accurately positioned on the ground. The effect is of actually "being there" - you can almost feel the chill winter wind in your face.
Install Notes: Unzip the file into a new directory under "scenes" folder in the PRE-Flight install directory. Run PRE-Flight and go menu Scene, Load and select the phrres.sce file.
Make sure you read the readme.txt file for proper operation of the scenery.
Super-detailed model of the C-130 in two paint schemes: camouflage and Blue Angel's "Fat Albert". Moveable control surfaces and intructions on how to do your own paint job with a choice of matt or gloss finish.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the .3dm file.
Super-scale model of the Korean conflict life-saver. Large scale and docile to fly, even for beginners. Super-detailed: scale engine; dual controls are visible thru the large bubble canopy; accurate, open-structure tail and body; dual MASH hospital stretchers with transparent wind screens.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the bellh13.3dm file.
PRE-Flight's finest "action" model. Awesome osprey with fully tiltable rotors has even the smallest details - landing gear covers actually open and close, collision enabled rotor disk (you crash if this touches the ground), and super-detailed 3D geometry. Features moveable surfaces, realistic "prop-rotor" sound, retractable landing gear, computer-stabilized controls, full collision.
Practice your hover, VTOL, STOL, and aerobatics all on the one aircraft. This is the ultimate model you want to fly.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the osprey1.3dm file.
Read the readme.txt file for more options, info, and hints on how to operate.
Very highly accurate model of the shuttle - showing details like the reaction control nozzles and engines. Has actual shuttle sound recording, animated engine exhaust, retractable landing gear. This is probably the best virtual flying model of the shuttle currently available.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the shuttle1.3dm file.
The US President's personal jet and flying White House. Striking blue and white color scheme by noted designer Raymond Loewy, this model has moveable control surfaces (including zap flaps), retracting gear, and spinning turbine blades.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the afo.3dm file.
Petite electric model of the famous World War II warplane! Fully animated - control surfaces move and retracts work. Nice paintwork - with instructions to do your own paint scheme using any paint program.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the p51d1.3dm file.
Massive model of the Boeing 747-400! Fully animated - all control surfaces move - turbines even turn! Graphics and physics by Paul Gage.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the 747.3dm file.
Santa's speed secret is a high-powered rocket hidden under the sleigh. Graphics by Yoshio Nakakita, Physics by PRE-Flight's AeroDesigner.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the santa1.3dm file.
PRE-Flight's tribute to the original airplane celebrating 100 years of Flight. Accurate physics show how difficult it was to fly. Movable control surfaces, accurate details. It is interesting to note that Scaled Composites' SpaceShip One (see model for download below) suffers from a lack of weight on the nose - the same condition which made the Wright Flyer unstable. This shows that even a hundred years of brilliant progress is no guarantee that we learn from our past mistakes.
Press F11 repeatedly to select different aircraft views. Press F10 to return to normal view.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the wflyer1.3dm file.
30-powered Heli capable of 3D and autorotation. Highly detailed - full rotor animation and smoke effects. Graphics by Logic Wizard, Physics by PRE-Flight's AeroDesigner.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the blackhawk.3dm file.
The Official PRE-Flight Screensaver features the same high-quality, DirectX 3D graphics as PRE-Flight. It features a "movie" starring the Pitts Biplane and the Ergo Heli (and introducing the PRE-Flight Blimp with a shameless plug).
Easily modifiable to play your own videos featuring your choice of aircraft in your own customized scenery. You are the director and the cameraman, as well as the pilot. Includes instructions for installation and how-to for advanced features.
Requires PRE-Flight (download a free copy below).
Please read the readme.txt file carefully for installation instructions.
30-powered Heli capable of 3D and autorotation. Highly detailed - open construction tail and full rotor animation. Graphics by Logic Wizard, Physics by PRE-Flight's AeroDesigner.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the lama.3dm file.
See how the Concorde would look in your favorite airline's colors. Contains original British Airways, Australia's Qantas, American Airlines, Air Canada, and Philippine Airlines color schemes.
Install Notes: This requires the "concord.zip" file below. Unzip the desired scheme file into the Concorde directory (under "models" in the PRE-Flight install directory). Read the readme.txt file for more options and info.
PRE-Flight's salute to one of history's greatest aircraft. The Concorde is fuly animated - control surfaces, landing gear, and even the famous "droop-snoot" is animated.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the conc1.3dm. Read the readme.txt file for more options and info.
The Taube is a very slow and forgiving plane. The realistic model has animated control surfaces and even (optional) animated wheels. Relax and fly it outdoors or indoors. Great for beginners and training.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the taube2.3dm. Read the readme.txt file for more options and info.
Fully operational, capable of all the things a real Harrier can do - VTOL, STOL, normal take-off and landings. Very accurate, super-detailed graphics, fully-animated control surfaces and landing gear - even the jet nozzles actually swivel and auxilliary intakes open and close. The physics allow full control of the exhaust vectoring from 0(level flight) to 90(hover) degrees. Two versions are included - a normal model and and "easy" model which is stabilized for easier hovering.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the harrier.3dm file and the harriere.3dm. Read the readme.txt file for more options and info.
This 3D capable plane has full-length, inboard ailerons to maintain control even in a hover. Practise the hover, harrier, and other 3D manuevers. Includes documentation to do your own paint scheme using any paint program.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the 3dsports1.3dm file. Read the readme.txt file for more options and info.
This is a highly-detailed model of the MS Hornet microelectric helicopter, CP (Collective Pitch) version. The paint scheme is stock but the zip file contains documentation to do your own paint scheme using any paint program.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the mshornet.3dm file. Read the readme.txt file for more options and info.
Island Scene features a detailed 3D Statue of Liberty - full sized. Island also has nice trees and landing strip. A tribute to New York's best known lady!
Install Notes: Unzip the files into the "default" directory under the "scenes" directory which is in PRE-Flight's install directory. Run PRE-Flight and go menu Scene, Load and select the new ".sce" file.
This is one Pattern (or Precision Aerobatic Competition) Plane with 3 color schemes: Patriot, Wizard, and Fractal. Choose any or all schemes, plus includes documentation to do your own paint scheme using any paint program.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the patt01.3dm file. Read the readme.txt file for more options and info.
Designed and manufactured by Advanced Composite Manufacturing, the Whiplash flies like the name - elevon controls, and airbrushed with the "American Pride" paint scheme.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the whiplash1.3dm file.
This is the frontrunner in the XPrize race to build the first cheap, commercial spacecraft. Designed by Burt Rutan of Scaled Composites, SpaceShipOne is carried aloft by WhiteKnight and is released after which it fires its rocket engine to boost itself to over 100km.
In this 1/4th scale model, you take off as the WhiteKnight carrying SpaceShipOne as a conventional plane. Then press 'X' to release, then 'B' to fire the rocket booster on SpaceShipOne (assume a high-angle attitude first).
My personal best is an altitude of 3800 meters before gliding down to land on the original runway where you took off. This is after a release from 100 meters without changing the default rocket settings. Booster rocket characteristics can be changed in Menu Model, Quick Edit, Engine Tab.
Read the included readme.txt file for more options and info.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the ss1.3dm file.
30-powered Heli capable of 3D and autorotation. Highly detailed - has pilot, smoke, etc. Graphics by Logic Wizard, Physics by PRE-Flight's AeroDesigner.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the ah6.3dm file.
30-powered Heli capable of 3D and autorotation. Highly detailed - has pilot and co-pilot, wheels instead of skids. Graphics by Logic Wizard, Physics by PRE-Flight's AeroDesigner.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the apache2.3dm file.
Piper 170 is actually 3 models in 1 - fly it as a park flyer, 40-powered, or quarter scale model. Graphics by Mariano Fernandez Seco, Physics by PRE-Flight's AeroDesigner.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the piper40.3dm, piperpf.3dm, and piperq.3dm files.
Funny Snoopy on Flying House - look ma - no hands! Titanic performance! Graphics by Mariano Fernandez Seco, Physics by PRE-Flight's AeroDesigner.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the Snoopy1.3dm file.
Colorful fun flyer from Hokusei Model (Japan). Graphics by Shinichiro Nishiya, Physics by PRE-Flight's AeroDesigner.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the FAir41.3dm file.
Slow and forgiving Electric Park Flyer can also perform. Unique "Warperon" technology.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the cfalcon.3dm file.
This sleek jet is still the fastest! Over 10Kg. weight and powered by 2 X 15 Kg. thrust jets.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the sr71.3dm file.
Super-scale WWII Super-Fighter, fully operational, fully animated control surfaces, retractable landing gear. Plus advanced texturing, etc. This model has the lot!
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the mustang1.3dm file. Enjoy but don't ever raise the landing gear while still on the ground!
New Feature: Full compatibility with Microsoft .x 3D file format. AeroDesigner is a fully user-configurable aircraft designer. AeroDesigner (based on PRE-Flight) allows an unlimited number of flight physics components and has a 3D interactive interface for ease of use. The finished design can be test flown using PRE-Flight. This is the model-creating tool to create PRE-Flight models!
Install Notes: Unzip the files into the PRE-Flight install directory. Create a shortcut to the aerodes.exe file(optional). Don't forget to read the Help and Tutorial (tutorial file link below).
This German "secret weapon" was powered by a rocket engine and features movable control surfaces, elevon controls, flaps, and new sound.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the me163.3dm file. Enjoy but watch out for rocket engine burns!
Modifications/corrections to Model Flight Characteristics
These modifications address some issues in the physics of the models found in version 1.8 of PRE-Flight. Models affected : Pitts Biplanes, Ergo helis, Cessna trainer, and Sailplane. Body air friction has been added, and rotor friction in the helicopter rotor has been corrected. Other Quick Parameters have also been corrected.
Install Notes: Unzip the file into a temporary directory. Read the readme.txt file for installation instructions.
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the ergo50.3dm file. QuickEdit parameters are similar to the Ergo 30 but the 50 is, of course, a larger and meaner machine!
Install Notes: Unzip the file into a new directory under "models" in the PRE-Flight install directory. Run PRE-Flight and go menu Model, Load and select the t33.3dm file. The model is hand-launched and will not take off from grass (like the real model) so go menu Scene, Quick Edit and increase the Main Model Location Y (altitude) to 2.0 and set Speed Z to about 5. Enjoy!
New Model for free download - F4U Corsair.
New Model for free download - F-4 Phantom.
New Model for free download - Mitsubishi Zero.
New Model for free download - Ford Trimotor.
New Model for free download - F-104 Starfighter.
New Model for free download - Marine One Sea King.
New Model for free download - General Dynamics F-111.
New Model for free download - Fokker Dr.1 Triplane.
New Model for free download - Fokker Eindecker.
New Model for free download - Boeing B-17 Flying Fortress.
New Model for free download - Boeing B-52 Stratofortress.
New Model for free download - Boeing B-29 Superfortress.
Beechcraft Staggerwing.
Focke-Wulf Triebflugel.
White Knight Two.
Panoramic Photoreal Scenery - Fitzsimmons Oval
C-47 Gooney Bird Paratroop Carrier
Boeing ACH-47A Chinook
Avro Lancaster Bomber
RAF SE5
DC-3 Gooney Bird
SpaceShipOne Model and Screensaver
Gee Bee Model Z
F-16 Fighting Falcon Thunderbird
B-2 Spirit Stealth Bomber
Aeroespatiale Alouette III helicopter
Supermarine Spitfire Mk I WWII fighter
Photorealistic Scenery - Albert Park
Photorealistic Scenery - Small Field
Lockheed C-130 Hercules
Bell H-13 MASH Helicopter
Osprey V-22
Space Shuttle Columbia
Air Force One (747-200)
P-51D Mustang WWII fighter (electric)
Boeing 747-400 UPS
Santa
Wright Flyer
Blackhawk UH-60 Helicopter
Lama SA315 Helicopter
Concorde Dream Airliners
Taube - Slow Park Flyer
Harrier
3D Sports Plane
MS Hornet Microhelicopter
Pattern Plane (3 in 1)
Whiplash X by ACM
SpaceShipOne from Scaled Composites
AH-6 Little Bird Heli (OH-6 Cayuse Armed Variant)
Apache AH-64 Heli
